Location:Home > News
News
Cylindrical Sintered Porous Element

Source:https://www.titanium-frit.com/news/917.html    Time:2022-01-24    Hits:78

1

Cylindrical Sintered Porous Element Technical Parameter

Raw Material: SS 316L,Titanium

Filter Rating Range: 0.22 Micron ~ 100 Microns

Filter Efficiency: > 99.99 %

Operation Temperature:  816 

Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 

                              70 mm, 80 mm, 90 mm, 100 mm

Length: 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization


Cylindrical_Sintered_Porous_Element.jpg


Cylindrical Sintered Porous Element Feature

1. Cylindrical sintered porous element is made from stainless steel powder particle or titanium powder particle

2. Cylindrical sintered porous element is sintered in a high temperature vacuum furnace

3. Cylindrical sintered porous element is depth filtration

4. Cylindrical sintered porous element is backwash

5. High porosity

6. High mechanical strength

7. High filter efficiency

8. High dirt holding capacity

9. High flow rate at low differential pressure

10. High temperature resistance

11. High corrosion resistance

12. Washable and Cleanable

13. Reusable

14. Long service life


Application

1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)

2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)

3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)

4. Catalysts powders recovery

5. Precoat support filtration


About Us

XINXIANG ZWEN FILTER CO.,LTD produces cylindrical sintered fiber felt element, cylindrical sintered mesh element, cylindrical sintered metal element, cylindrical sintered porous element, cylindrical sintered powder element, and cylindrical sintered wire cloth element.


XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.


XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test. 


XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.


XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.


Contact Us

XINXIANG ZWEN FILTER CO.,LTD

HEAD OFFICE: NO.728, 7TH FLOOR, JINGYE INTERNATIONAL, NORTHEAST CORNER, INTERSECTION OF JINSUI AVENUE AND XINER STREET, HONGQI DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

TEL: +86-373-5807218

FAX: +86-373-5895995

EMAIL: info@zwenfilter.com

WEBSITE: www.zwenfilter.com

WEBSITE: www.leerfilter.com             

WEBSITE: www.ti-frit.com

WEBSITE: www.ti-filter.com

WEBSITE: www.titanium-frit.com

WEBSITE: www.titanium-filter.com

WEBSITE: www.metal-sintered-filter.com

WEBSITE: www.sintered-porous-filter.com

WEBSITE: www.pleated-stainless-steel-filter-element.com

WEBSITE: www.pleated-stainless-steel-filter-cartridge.com