Source:http://www.titanium-frit.com/news/918.html Time:2022-02-02 Hits:69
ZWEN------The Best Backwash Sintered Filter Maker
Cylindrical Sintered Powder Element Technical Parameter
Raw Material: SS 316L,Titanium
Filter Rating Range: 0.22 Micron ~ 100 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: ≤ 816 ℃
Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm,
70 mm, 80 mm, 90 mm, 100 mm
Length: 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector/Fitting/Adaptor:
1. DOE
2. Code 2 (226+Flat End)
3. Code 3 (222+Flat End)
4. Code 7 (226+Fin End)
5. Code 8 (222+Fin End)
6. Thread (NPT,BSP,G,M,R)
7. Flange
8. Special customization
Cylindrical Sintered Powder Element Feature
1. Cylindrical sintered powder element is made from stainless steel powder particle or titanium powder particle
2. Cylindrical sintered powder element is sintered in a high temperature vacuum furnace
3. Cylindrical sintered powder element is depth filtration
4. Cylindrical sintered powder element is backwash
5. High porosity
6. High mechanical strength
7. High filter efficiency
8. High dirt holding capacity
9. High flow rate at low differential pressure
10. High temperature resistance
11. High corrosion resistance
12. Washable and Cleanable
13. Reusable
14. Long service life
Application
1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)
2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)
3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)
4. Catalysts powders recovery
5. Precoat support filtration
About Us
XINXIANG ZWEN FILTER CO.,LTD produces cylindrical sintered mesh element, cylindrical sintered metal element, cylindrical sintered porous element, cylindrical sintered powder element, and cylindrical sintered wire cloth element.
XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.
XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test.
XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.
XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.
Contact Us
XINXIANG ZWEN FILTER CO.,LTD
HEAD OFFICE: NO.728, 7TH FLOOR, JINGYE INTERNATIONAL, NORTHEAST CORNER, INTERSECTION OF JINSUI AVENUE AND XINER STREET, HONGQI DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA
FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE,
TEL: +86-373-5807218
FAX: +86-373-5895995
EMAIL: info@zwenfilter.com
WEBSITE: www.zwenfilter.com
WEBSITE: www.leerfilter.com
WEBSITE: www.ti-frit.com
WEBSITE: www.ti-filter.com
WEBSITE: www.titanium-frit.com
WEBSITE: www.titanium-filter.com
WEBSITE: www.metal-sintered-filter.com
WEBSITE: www.sintered-porous-filter.com